The Netbell-4-4Bel is a one-stop solution that comes with everything needed for installation and operation a buzzer system. This kit includes one Netbell-4K networked Bell Controller, four signal bells kit (6 inch,>= 86dBa) with weatherproof backbox, each bell can cover up to 8,000sqf working area at normal noise level. The bell kit comes with one 6-inch bell, one weatherproof back box for wall mounting and one 12VDC power supply to power the bell, one 10ft power cable. The Netbell-4K is a net-work enabled bell controller installed within a NEMA (IP66) rated box that can be used in environment where dust and non-direct water are issues, all software and mounting hardware required for installation and operation are included. There are 4 relay outputs (Dry Contact, 1-Form-A relay 48VAC@8A Max) that can be used to control up to 4 bells, 1 digital input that can be used to wire a push switch to ring the bell manually for emergency.
The Netbell-4K is a network-enabled bell controller that is installed within a NEMA (IP66) rated box, making it suitable for use in environments where dust or moisture pose a challenge. With four relay outputs (dry contact, 1-Form-A relay 48VAC@8A Max), the device can control up to four bells/buzzers and other timed signal equipment. In addition, there is one digital input that can be used to wire a push switch to ring bells manually in case of an emergency.
The Netbell device are built as low voltage system that’s easy to install and use, no expensive contractors needed for installation.
