Questions? Call Us: 336-485-6199

Employee Alarm System for Industrial Facilities

Linortek builds IP-based employee alarm systems that meet OSHA 29 CFR 1910.165 requirements — with audible and visual alerts that reach every worker simultaneously, no monthly fees.

 

→ See the complete system with NWS automated alerts — audio + visual alert solutions

→ Build your perfect employee alarm system — display, speakers, tone generators, push buttons, key fobs

What OSHA Requires for Employee Alarm System

OSHA 29 CFR 1910.165 requires that any workplace with more than 10 employees maintain a functioning employee alarm system capable of alerting all workers — including those with disabilities — to an emergency. The alarm must be perceivable above ambient noise and light levels throughout the facility. This page covers what the standard requires, how to verify compliance, and what a modern IP-based employee alarm system looks like in practice.

Your employee alarm system must:

  • Alert all employees including disabled workers, with a way to report emergencies (1910.38(d))
  • Be heard, seen, or otherwise perceived by everyone in the facility (1910.165(b)(2)) — this is where visual alerts on displays become critical in high-noise environments
  • Use distinctive signals if the same system is used for multiple purposes, like fire brigade alerts and general emergencies (1910.38(d))
  • Include an available emergency communications system — a public address system, portable radio, or equivalent — to notify employees and contact emergency services (1910.165(b)(4))
  • Have established procedures for sounding alarms (1910.165(b)(5))
  • Have auxiliary/backup power if primary electricity is cut off (1910.165(b)(2))
Linortek employee alarm system

Installation and Restoration

What qualifies as an approved alarm device? OSHA 1910.165(c)(1) accepts steam whistles, air horns, strobe lights, and tactile devices — as well as modern IP-based speaker and display systems. After any test or alarm activation, the system must be restored to normal operating condition as soon as possible, with spare components kept on hand (1910.165(c)(2)).

Maintenance and Testing Requirements

  • Non-supervised systems must be tested every two months, using a different actuation device in each test when multiple devices exist (1910.165(d)(2))
  • Power supplies must be maintained or replaced as needed to keep the system fully operational, with backup alarms available when the system is out of service (1910.165(d)(3))
  • Systems installed after January 1, 1981 must be supervised and provide positive notification to assigned personnel whenever a deficiency exists (1910.165(d)(4))
  • Servicing, maintenance, and testing must be performed by properly trained personnel (1910.165(d)(5))

Manual Operation

Manually activated alarms must be unobstructed, conspicuous, and readily accessible to employees (1910.165(e)). In practice, this means push buttons or key fobs placed at multiple points throughout the facility — not just at a central station.

Download the Checklist

Download our OSHA 1910.165 Employee Alarm System Compliance Checklist — a printable, fillable checklist covering all four compliance categories: General Requirements, Installation and Restoration, Maintenance and Testing, and Manual Operation, with direct CFR citations for each item.”

How the Linortek Employee Alarm System Addresses OSHA Requirement

Perceivable by all employees

IP speakers rated for high-noise industrial environments; VidiMax visual alerts for workers in areas where audio doesn’t reach or where hearing protection is worn

🚨

Auxiliary power

PoE-powered speakers maintain operation during power disruptions when connected to a PoE switch with UPS backup

🔄

Distinctive signals

The Netbell-NTG-B stores multiple pre-recorded messages and web-based scheduling software, that can be used to schedule testing audio automatically.

⚙️

Manually activated

Push buttons and key fobs placed throughout the facility, unobstructed and accessible

📋

Public address capability

IP call stations with gooseneck microphone for live announcements to the entire facility

🔧

NWS Integration

VidiMax monitors the NWS API 24/7. The matching alert fires immediately — no one needs to be watching the weather.

Proven Results from Real Workplaces

See how businesses across industries have transformed their emergency response capabilities with Linortek solutions.

Manufacturing Facility – Fire Safety Integration

In high-stakes manufacturing environments, safety can never be left to chance. A production manager at a specialized pump manufacturer required a way to automate emergency notifications and daily break bells—all while meeting strict NFPA standards. Linortek’s Netbell system was installed to provide instant facility-wide alerts. The color-coded panic button system allows employees to report different emergency types (fire, medical, security) with a single touch. Pre-recorded messages activate automatically while strobe lights alert workers in noisy production areas. The system also handles daily shift bells, eliminating the need for separate systems.

California Retail Chain – SB 553 Multi-Location Deployment

A California retail chain with 15 store locations needed an SB 553 compliant workplace violence prevention system that could be managed centrally while protecting employees at every store. Linortek deployed panic buttons at each location with network-based incident logging accessible to corporate security. When a panic button is activated, the system triggers pre-recorded lockdown messages, activates strobe lights, and automatically logs the incident with timestamp and location data. During their first Cal/OSHA inspection, they produced complete 5-year documentation in minutes, demonstrating full compliance with zero violations.

School District – Campus-Wide Emergency Communication

A school district replaced their aging intercom system with Linortek’s IP-based Netbell solution to meet modern safety requirements. IP call boxes were installed in classrooms allowing teachers to broadcast emergency alerts instantly. Color-coded panic buttons at the front office enable staff to trigger specific emergency protocols (lockdown, evacuation, medical). LED text displays throughout hallways show written alerts for hearing-impaired students and staff. The system also handles daily bells and announcements, replacing three separate systems with one integrated solution. Installation was completed during summer break with minimal disruption.

Office Building – Automated Lockdown System

A multi-tenant office building needed an employee alarm system that would protect all tenants while providing each business their own emergency controls. Linortek designed a shared panic button network with zone-based messaging, allowing each tenant to trigger alerts for their specific areas while also enabling building-wide notifications. The system integrates with access control to automatically lock doors during emergency events. Visual LED displays show context-aware messages (e.g., “LOCKDOWN – SHELTER IN PLACE” or “EVACUATION – USE STAIRS”). All tenants achieved OSHA compliance without individual system investments, and California-based tenants satisfied SB 553 requirements.

Which Products are Right for Your Facility?

OSHA 29 CFR 1910.165(d)(2) requires non-supervised systems to be tested every two months. Each test should use a different actuation device when the system has multiple devices.

OSHA 1910.165(b)(2) requires that alarms be perceivable — heard, seen, or otherwise detected — by every employee. In high-noise environments or areas where workers wear hearing protection, visual alarms such as strobe lights or display-based alerts are necessary to meet this requirement.

An employee alarm system under OSHA 1910.165 is designed to alert all workers to any emergency requiring evacuation or protective action, including weather events, chemical spills, or workplace violence situations. A fire alarm system is specifically for fire detection and suppression. If the same system serves both purposes, OSHA requires distinctive signals for each (1910.38(d)).

Yes. OSHA 1910.165(c)(1) permits any approved device or combination of devices — including public address systems — that meets the standard’s requirements for audibility, visibility, and reliability. Linortek Netbell IP-based speaker system paired with VidiMax visual display alerts meets and typically exceeds these requirements.

OSHA 1910.165(b)(2) requires auxiliary power if electricity is shut off. PoE-based systems can maintain operation when connected to a PoE switch backed by a UPS (uninterruptible power supply).

OSHA 1910.165(d)(5) requires that servicing, maintenance, and testing be performed by properly trained personnel. This can be facility staff trained on the system or a qualified third party.

The right module depends on your specific needs. Here’s a breakdown of available options:

1. IP Intercom Terminal

Use these at entrances, gates, and access points to enable two-way communication. You can install multiple terminals within one system.

2. IP Call Station

Ideal for front offices or administrator areas, these stations allow for announcements and centralized control of networked endpoints. We offer two models:

3. VOIP Gateway

Connect a VOIP gateway to your existing phone system for live paging from any connected phone.

4. IP Audio Broadcast Terminal – External Audio Source Integration

Play audio from external sources (e.g., MP3 players) through IP speakers.

5. IP Call Box

Install anywhere in your facility to allow employees to make announcements to Netbell IP speakers.
You can also pair it with an 8-ohm speaker to create a cost-effective IP speaker system with talk-back capability.

You can add a Netbell-NTG-B controller for programmable break time scheduling, automated reminders, and fire drills with custom pre-recorded messages. You only need one Netbell-NTG-B device per system.

To manually activate an emergency sound, you can use one of the following push button switches:

Local Emergency Push Button Set – Connect to the digital inputs on the Netbell-NTG-B controller to manually activate pre-recorded emergency messages. 

Network Push Button Set – Install this push button set at any location of your facility as long as it’s on the same network with the Netbell-NTG-B, to remotely activate pre-recorded emergency messages.

Here is a s standard IP paging system designed for factories, warehouses for instant alert, pre-recorded emergency messages, live announcements: 

Netbell Emergency Alert System for Business & Industrial Facilities

Yes. The Netbell-BT-105 allows you to add modern IP speakers to new areas of your facility while keeping your existing analog paging system exactly as it is. Simply connect the BT-105 to your current amplifiers via its line output, then add IP speakers over your network—no need to trace old wiring or reconfigure your existing setup. This makes expansion simple and cost-effective as your facility grows.

Yes, the Netbell-NTG-B controller has 4 digital inputs (5-24VDC or dry contact), that you can use one of them to integrate with the sprinkler system, and assign a message to this input.

Ready to Protect Your Workplace?

Join thousands of organizations worldwide that trust Linortek for reliable, cost-effective employee alarm and emergency notification solutions.

Prefer to talk directly?

Tell Us About Your Needs

We’ll recommend the perfect solution for your facility and provide a detailed quote with transparent pricing.