The Ultra 300 is built on Linortek TCP/IP web-based product platform with built-in web server, hardware and software for installation and operation are included, no add-on software to install, no special programming skills required. With the Ultra 300, you can access, control and monitor your equipment over the network or Internet from anywhere with a web browser.  Using relay switched outputs, digital inputs and analog inputs, you can upgrade any stand-alone physical hardwired equipment to a network/ Internet enabled product for remote control and data acquisition with the Ultra 300. The built-in MQTT protocol provides a standard method of communication with any IoT platforms and applications to integrate the data acquired by the Ultra 300 into your own system.

Download Product Brochure

Linortek Ethernet IO Controller Brochure (626.8 KiB)

Download Linortek Ethernet I/O Controller Technical Specifications

Linortek Ethernet IO Controller Technical Specifications (144.0 KiB)

The Ultra 300 is a housed unit with a DIN rail mountable enclosure that can be snapped onto DIN rail or attached to any flat surface such as a wall or under a counter. It has 2 relay outputs (Dry contact, signal relay,2 Form C, 1A @ 30VDC), 2 optically isolated digital inputs, 2 analog inputs, 1 temperature & humidity sensor input.

The digital inputs on the Ultra 300 can be used to calculate a range of results such as:

• State: This is useful for knowing if an input is on or off, like a door switch being on or off.
• Counter: Non-resettable/resettable counter.
• Frequency: Counts the frequency of an input in KHz (kilo hertz or1/1000 seconds). This could be useful in displaying a tachometer where 60Hz = 1 R.P.M.
• Period: In 1/1000 seconds an input in kHz (milli-seconds or 1/1000 seconds). This would be useful for measuring timed events

The Key Features

• Hardware-based encryption system
• CAN interface
• MQTT client
• Supports HTTPS connections
• Secure, built-in web server for configuration and remote monitoring
• Email alerts based on user-defined conditions (supports encrypted email servers)
• Secure Peer-to-Peer (P2P) Communication
• 16 condition-logic task builder
• Can be provisioned via USB connection or Telnet.
• Up to 2MB Flash memory (plus an additional 160 KB of Boot Flash), up to 512KB SRAM memory
• Real-Time Clock with NTP server synchronization
• Automatic daylight savings and leap year adjustment
• Static or DHCP IP address configuration
• Rugged DIN-Rail/wall-mountable enclosure