Summer Sale Special

Netbell-4-4Bel Network Break Bell System (4 Bells)

$1726.00USD $1,674.22
Netbell-4-4Bel Network Break Bell System (4 Bells)
Netbell-4-4Bel Network Break Bell System (4 Bells)
Netbell-4-4Bel Network Break Bell System (4 Bells)
Netbell-4-4Bel Network Break Bell System (4 Bells)
Netbell-4-4Bel Network Break Bell System (4 Bells)
Netbell-4-4Bel Network Break Bell System (4 Bells)
Netbell-4-4Bel Network Break Bell System (4 Bells)
Netbell-4-4Bel Network Break Bell System (4 Bells)
Netbell-4-4Bel Network Break Bell System (4 Bells)
Netbell-4-4Bel Network Break Bell System (4 Bells)
Netbell-4-4Bel Network Break Bell System (4 Bells)
Netbell-4-4Bel Network Break Bell System (4 Bells)

Netbell-4-4Bel Network Break Bell System (4 Bells)

$1726.00USD $1,674.22
Model Number: 01-910-00120
Add a Push Switch: Please select if you need a push button, with a push switch, you can trigger emergency alarm.
  • No Thanks.
  • 1 Basic Push Switch
  • 1 Palm Push Switch
Add a POE-IP LED Digital Clock; the digital clock is a plug and play solution that can update its time from the same NTP server as your Netbell controller, with automatic adjustment for daylight saving time, providing completely maintenance free operation.
  • No Thanks.
  • One Digital Clock
Maximum quantity exceeded
Minimum purchase amount of 0 items is Required
Maximum purchase amount of 0 is Allowed
Your Price: USD $1,674.22
1674.22
A one-time price of USD $1,674.22 will be added to your order.
Manufacturer: Linortek1
  • Description
  • Specifications

Overview

The Netbell-4-4Bell is a one-stop solution for schools, factories, industrial facilities, warehouses to build a fully automated web-based timed alert system for signaling shift changes, breaks and any other timed signal applications in areas of high ambient noise levels. This kit includes one Netbell-4K networked Bell Controller, four signal bells kit (6 inch,>= 86dBa) with weatherproof backbox, each bell can cover up to 8,000sqf working area at normal noise level.

The Netbell-4K is a network enabled bell controller installed within a NEMA (IP66) rated box that can be used in environment where dust and non-direct water are issues. There are 4 relay outputs (Dry Contact, 1-Form-A relay [email protected] Max) that can be used to control up to 4 bells/buzzers and other timed signal equipment, 1 digital input that can be used to wire a push switch to ring the buzzer manually for emergency. It’s built on a TCP/IP platform with a built-in web server and special software designed for scheduling a bell system, all software and mounting hardware required for installation and operation are included. With the built-in web interface, you can access, control and schedule bells over a network or the Internet, no additional software or designated computer required.

What is in the box

  • One Netbell-4 SERVER
  • One 3-meter power cable
  • One 1-meter RJ45 network cable
  • Four 3-meter bell cables (CP Connector)
  • One 12VAC power supply
  • Wall mounting brackets and hardware
  • Four bell kits (each bell kit includes one bell, one weatherproof back box, one 12VDC power supply and one 10ft cable)
  • 10M/100M RJ45 Internet interface with connection and activity LEDs
  • 4 Dry Contact outputs, 1-Form-A relay [email protected] Max
  • 1 optically isolated digital input, 12V 1mA or pull-down switch selectable
  • Status LEDs (pulse, bootloader, and locate)
  • Ethernet Bootloader (for server hardware code upgrade)
  • 12VAC power supply (for controller), 100-240VAC50/60Hz
  • 1-meter CAT5 cable supplied
  • On board temperature sensor and input voltage sensor
  • Bell kit: 6-inch 12 VDC, Die Cast Aluminum Enclosure, Volume: >= 86dB, weather proof backbox, 12VDC power supply
  • Working temperature from 0 to +70 Celsius
  • Storage temperature from -40 to +125 Celsius
  • Humidity from 10% to 80% non-condensing          

Supported Protocols: HTTP/SMTP/SNTP