The Netbell-NTG-H is a network enabled, custom designed, affordable and easy to implement multi-function speaker system. It can be used to produce timed or manually triggered custom sounds to signal start and stop work, lunch breaks, shift changes, emergency alarm, service notification, as well as for background music or recordings, live announcements for small to mid-sized warehouses, factories, workshops, commercial buildings in areas of high ambient noise levels.

The Netbell-NTG-W is a network enabled, custom designed, affordable and easy to implement multi-function speaker system. It can be used to produce timed or manually triggered custom sounds to signal start and stop work, lunch breaks, shift changes, emergency alarm, service notification, as well as for background music or recordings, live announcements for Small to mid-sized schools, factories, businesses, commercial buildings, retail stores, churches.

The Netbell-NTG-C is a network enabled, custom designed, affordable and easy to implement multi-function speaker system. It can be used to produce timed or manually triggered custom sounds to signal start and stop work, lunch breaks, shift changes, emergency alarm, service notification, as well as for background music or recordings, live announcements for Small to mid-sized schools, factories, businesses, commercial buildings, retail stores, churches.

This is our 2nd generation of Fargo R8 TCP/IP web-based remote control board. Compared with the first generation, the G2 board has the same design,with improved circuits, added battery backed RTC, new SSL encoder, more schedules (16 schedules which are constructed as IF ... THEN statements, allowing you to use the relay on one device to control a relay on another device over a network, or to take a signal from your main location system, and trigger remote equipment in different locations).

This is our 2nd generation of Fargo R4DI TCP/IP web-based remote control board. Compared with the first generation, the G2 board has the same design,with improved circuits, added battery backed RTC, new SSL encoder, more schedules (16 schedules which are constructed as IF ... THEN statements, allowing you to use the relay on one device to control a relay on another device over a network, or to take a signal from your main location system, and trigger remote equipment in different locations).

Please note: The Koda 100 uses the same hardware with the Netbell-2 (PN#01-910-00014), but doesn't have the bell scheduling software. If you are looking for a device to control bells, you need to order the Netbell-2.

KODA 200 is a housed unit with a DIN rail mountable enclosure that can be snapped onto DIN rail or attached to any flat surface such as a wall or under a counter. It has 4 relay outputs which can drive signals to control 10V 50mA external devices, 2 optically isolated digital inputs.
Please note: The output drivers on the KODA200 are designed to drive "signals" and not "loads". In some cases, "inductive loads" can cause an interruption in operation requiring a power reset.

This is our 2nd generation of Fargo R4ADI TCP/IP web-based remote control board. Compared with the first generation, the G2 board has the same design,with improved circuits, added battery backed RTC, new SSL encoder, more schedules (16 schedules which are constructed as IF ... THEN statements, allowing you to use the relay on one device to control a relay on another device over a network, or to take a signal from your main location system, and trigger remote equipment in different locations).

A simple and affordable temperature / humidity monitor and alert solution for server closets, computer rooms, data centers, and any environment where control of a sensitive environment is crucial. Real time Monitoring of your environment from anywhere, get alerts instantly, no 3rd party server and no monthly fees.
This kit comes with an external temperature & humidity sensor, the sensor is on 6-foot lead. You can also select a door contact switch or power sensor to monitor door and power status.

Linortek IoTMeter WFMN-Di Hour Meter is a self-contained, WiFi enabled, custom developed device that can be used on all types of equipment especially for mobile equipment to collect run time data for preventive maintenance. It is built on Linortek TCP/IP web-based product platform housed in an IP66/67 Polycarbonate enclosure which can connect to the LAN through WiFi. It is equipped with 2 digital inputs, an impact sensor, and specially designed software that functions as an hour meter. The hour recording can be triggered by the digital inputs.

Linortek IoTMeter WFMN-ADi Hour Meter is a self-contained, WiFi enabled, custom developed device that can be used on all types of equipment especially for mobile equipment to collect run time data for preventive maintenance. It is built on Linortek TCP/IP web-based product platform housed in an IP66/67 Polycarbonate enclosure which can connect to the LAN through WiFi.  ​It is equipped with 2 digital inputs, 2 relay outputs, 2 analog input​s, ​an impact sensor​, and specially designed software that functions as an hour meter. The hour recording can be triggered by different ways ​including digital input​, analog ​input, or relay activation.

Linortek’s network digital clock is a plug and play solution. Users only need to plug it into the Netbell clock output; no configuration needed and no additional power source required. It will be powered by the Netbell server and synchronizes its time from the same NTP server to an accurate time, with automatic adjustment for Daylight Saving Time providing completely maintenance-free operation.

This is a plug & play network bell controller in the Netbell family that can be used to control one bell/buzzer or any other signal devices up to 1.6A directly. This controller includes everything you will need for installation and operation, the bell output that can provide 24VAC or [email protected] power to power your device, no additional power supply needed. There are two voltage types available, please select one that can fit your requirements.

Netbell can now work with a LED digital clock to synchronize its time from the Netbell to an NTP server for an always accurate time, with automatic adjustment for Daylight Saving Time, providing a complete maintenance free operation. With the large, bright 4 inch high digits, the clocks are easily visible up to 250ft. It’s a plug & play solution, no configuration needed, no additional power supply required, it will be powered by the Netbell server.

Select a digital clock below, we will add a clock connector to your Netbell so that you can have a complete solution for audible alerts and a reliable time display.

Click HERE for more details about the Network Digital Clock.

This is a pre-order item, we expect to deliver your order before March 31. We appreciate your early commitment! Please use this coupon code to get 20% of EARLY BIRD discounts at your checkout: EARLYBIRD21

Netbell can now work with a LED digital clock to synchronize its time from the Netbell to an NTP server for an always accurate time, with automatic adjustment for Daylight Saving Time, providing a complete maintenance free operation. With the large, bright 4 inch high digits, the clocks are easily visible up to 250ft. It’s a plug & play solution, no configuration needed, no additional power supply required, it will be powered by the Netbell server.

Select a digital clock below, we will add a clock connector to your Netbell so that you can have a complete solution for audible alerts and a reliable time display.

Click HERE for more details about the Network Digital Clock.

Netbell can now work with a LED digital clock to synchronize its time from the Netbell to an NTP server for an always accurate time, with automatic adjustment for Daylight Saving Time, providing a complete maintenance free operation. With the large, bright 4 inch high digits, the clocks are easily visible up to 250ft. It’s a plug & play solution, no configuration needed, no additional power supply required, it will be powered by the Netbell server.

Select a digital clock below, we will add a clock connector to your Netbell so that you can have a complete solution for audible alerts and a reliable time display.

Click HERE for more details about the Network Digital Clock.

Netbell can now work with a LED digital clock to synchronize its time from the Netbell to an NTP server for an always accurate time, with automatic adjustment for Daylight Saving Time, providing a complete maintenance free operation. With the large, bright 4 inch high digits, the clocks are easily visible up to 250ft. It’s a plug & play solution, no configuration needed, no additional power supply required, it will be powered by the Netbell server.

The Netbell-KC is a network enabled, all-in-one break bell system with 4” digital clock that can synchronize its time from the Netbell NTP Server, so that you will get a consistent time displayed and synchronized with your bell system. This provides a complete solution for audible alerts and a reliable time for both your break bells and clock for factories, schools and industrial facilities.

The Netbell-KBC is a network enabled, all-in-one break buzzer system with 4” digital clock that can synchronize its time from the Netbell NTP Server, so that you will get a consistent time displayed and synchronized with your bell system. This provides a complete solution for audible alerts and a reliable time for both your break bells and clock for factories, warehouses and industrial facilities.

The Netbell-KL-C is a network enabled, all-in-one extra loud break bell system with 4” digital clock that can synchronize its time from the Netbell NTP Server, so that you will get a consistent time displayed and synchronized with your bell system. This provides a complete solution for audible alerts and a reliable time for both your break bells and clock for factories, warehouses and industrial facilities.

The Netbell-KL-M2-C is a network enabled, all-in-one extra loud break bell system with 4” digital clock that can synchronize its time from the Netbell NTP Server, so that you will get a consistent time displayed and synchronized with your bell system. This provides a complete solution for audible alerts and a reliable time for both your break bells and clock for factories, warehouses and industrial facilities.

The Netbell-K-E1-C is a network enabled, all-in-one break bell system with 4” digital clock that can synchronize its time from the Netbell NTP Server, so that you will get a consistent time displayed and synchronized with your bell system. This provides a complete solution for audible alerts and a reliable time for both your break bells and clock for factories, schools and industrial facilities.

The Netbell-KB-E1-C is a network enabled, all-in-one break buzzer system with 4” digital clock that can synchronize its time from the Netbell NTP Server, so that you will get a consistent time displayed and synchronized with your bell system. This provides a complete solution for audible alerts and a reliable time for both your break bells and clock for factories, warehouses and industrial facilities.

The Netbell-K-E2M-C is a network enabled, all-in-one break bell system with 4” digital clock that can synchronize its time from the Netbell NTP Server, so that you will get a consistent time displayed and synchronized with your bell system. This provides a complete solution for audible alerts and a reliable time for both your break bells and clock for factories, schools and industrial facilities.

The Netbell-KL-E1-C is a network enabled, all-in-one extra loud break bell system with 4” digital clock that can synchronize its time from the Netbell NTP Server, so that you will get a consistent time displayed and synchronized with your bell system. This provides a complete solution for audible alerts and a reliable time for both your break bells and clock for factories, warehouses and industrial facilities.

The Netbell-KL-E2M-C is a network enabled, all-in-one extra loud break bell system with 4” digital clock that can synchronize its time from the Netbell NTP Server, so that you will get a consistent time displayed and synchronized with your bell system. This provides a complete solution for audible alerts and a reliable time for both your break bells and clock for factories, warehouses and industrial facilities.

The Netbell-KB-E2M-C is a network enabled, all-in-one break buzzer system with 4” digital clock that can synchronize its time from the Netbell NTP Server, so that you will get a consistent time displayed and synchronized with your bell system. This provides a complete solution for audible alerts and a reliable time for both your break bells and clock for factories, warehouses and industrial facilities.