Communication Modules
To set up paging system with your IP speaker, first choose your preferred paging method, here are the communication options that you can use in the system:
- Netbell-MIC-608G, or Netbell-MIC-813 IP call station for direct announcements
- Intercom terminal and IP call box for stationed communication points
- SIP Audio broadcast terminal for integrating with other external audio sources such as MP3, VOIP phone system for company-wide paging
- Or a combination of these methods for maximum flexibility
Control & Scheduling Modules
Unlock the power of your IP paging system with the Netbell-NTG network audio message generator – add automatic break time alarms, routine reminders, and emergency notifications functionalities to your PA system.
Important Requirements
To achieve the best audio quality for your IP paging system, we recommend building a dedicated VLAN for this system with network equipment compatible with multicast protocol. Netbell IP paging devices support PoE/PoE+, and a properly configured network infrastructure will ensure a smooth installation.
- The speakers and the PC running the NACT desktop app must be on the same LAN
- Network and Switch Requirements:
- Power over Ethernet (PoE/PoE+) Switch Ports
- Minimum CAT5 cable with maximum of 100 meters from the device to switch
- Network switch capacity to handle power loads for all devices
- Router: Must support IGMP (Internet Group Management Protocol) and PIM (Protocol Independent Multicast)
- Switch: Must support IGMP snooping
