Netbell-KBC time clock buzzer system timed alert systemNetbell-KBC Buzzer led clock system
Bell System for Factory/Warehouse
Extra loud easy-to-install break bell system for large industrial working area.
Netbell-4K controllerNetbell-4 New Bell Controller with Digital Input for Emergency
Bell Controller for Existing Bell System
Programmable web-based bell controller for any break bell systems from low voltage to line voltage.
Netbell-KC school bell system timed alert systemNetbell-KC bell and led clock system
Bell System for School/Office
Programmable web-based bell controller, affordable break bell system for schools and offices.
Netbell tone generatorNetbell-NTG Timed Alert Controller
PA System Controller
Netbell multi-tone generator to generate and schedule bell sounds or custom messages for any PA systems for break time alarm.

Netbell is an industrial, network enabled wireless break Bell Alarm System that has been used and loved by thousands of customers

The Netbell, bell alarm system, is built on TCP/IPplatform with a built-in web server and special scheduling software for buzzer systems. All software and mounting hardware required for installation and operation are included. You can access, control and schedule bells with the built-in web interface. When your buzzer system operates over the network from a web browser, there are no additional software or designated computers required, eliminating the need for wiring and control systems. The Netbell is a cost-effective solution for schools, factories, warehouses and other facilities to signal start and stop working times, lunch breaks, shift changes, general alarms and more.

  • All-In-One System

    No software to purchase

  • Simple to Use

    Low voltage system, setup in minutes

  • Cost-Effective

    Program from web browser with the IP address, eliminating the need for wiring and control system

  • Easy to Expand

    Each Netbell device is an independent system, you can add more units as needed without infrastructure changing

Netbell-NTG Tone and Message Generator with Controller

To generate and schedule different tones or record your own messages up to 10 hours to play through any existing PA or school intercom system or paging systems

Netbell-4 New Bell Controller with Digital Input

To replace or upgrade most of the old bell timer systems on the market from low voltage to line voltage.

Netbell Timed Alert System: Network-KBC-M2 Network Break Buzzer and Clock System

Extra loud easy-to-install break buzzer system for factories, warehouses and other industrial buildings.

Netbell Timed Alert System: Netbell-KC-M2 Network Bell and Clock System

All-in-One affordable and easy-to-install break bell timer system for schools, commercial facilities.

Netbell Timed Alert System: Speaker System for break timed alert, live announcements, background music

Multi-function speaker system for break time/emergency alarm, live announcements, background music.

Case Study

PlayStayTion Pet Resort and Training Custom Alarm System

PlayStayTion Pet Resort and Training is a five-star dog boarding, training and grooming spa in Sadler, Texas.  PlayStayTion wanted to find a way to notify staff when new guests entered the reception area for check-in, leaving guests waiting for service, additionally for scheduled meal and activity times while maintaining the ambiance of a spa.

PlayStayTion owners, Vicki and Will Nourse, found Linortek’s Netbell® system online and picked the Netbell-NTG Tone Generator to record custom sounds for different events. When customers enter the lobby, a tone plays to inform staff, ensuring that customers receive prompt attention. Netbell’s customizable messages and tones give PlayStayTion the spa atmosphere to match their service. Instead of harsh doorbells and loud announcements, PlayStayTion has calming, soft tones that don’t trigger barking, and messages such as “Okay, doggies. It’s two p.m. Time to play. Your activity instructor will be.…”

Click here to read the whole story.

Request Access to Netbell Live Demo

Enter your email address below to receive Netbell Live Demo link.

Email Marketing by Benchmark

How It Works

The Netbell Timed Alert System is very simple to use. Setting up your Netbell System can be done in three easy steps.

Step One

Power up the Netbell, and connect it to your network. It will get an IP address from your router automatically. Finding the IP address with our Free Discover program.

Linortek  Netbell Timed Alert System Discoverer Program
Step Two

Click the IP address displayed on the Discover, it will open the Netbell software on your web browser automatically. Login to the software to add up to 500 event schedules.

Linortek Netbell Timed Alert System Web Scheduling Page
Step Three

Install the Netbell. At locations where network is not available, you can use the Netbell as a standalone device. Connect it to a PC, add bell schedules, then remove, and it will function as scheduled.

Netbell timed alert system with clock

The need for break bell alarm systems in manufacturing settings

In manufacturing settings, having the ability to schedule alerts and have them sound off on scheduled times is essential. Manufacturing break bell alarm systems can be used from the factory floor to the warehouse, for organizing tasks or lunch break times.

Now, it is easy for factories and manufacturing businesses to have a fully automated web-based time alert system to signal shift changes, general alarm breaks or any other time alert system.

The need for break bell alarm systems in educational settings

These bell alarm systems can be used outside of factory warehouses, too. Break bell are often used at places like educational institutions where it is required for live quiz competitions or games. A break time sounder system allows users to press the buzzer quickly in response to a question posed during school competitions.

Linortek’s automatic buzzer system provides optimal solutions

Rather than relying on human intervention to decide which team pressed the button first, Linortek designed an automatic quiz buzzer system that accurately configures the numbers, taking the delay into account.

Our recent developments allow you to add a digital clock to the Netbell server with a liquid crystal display. Whether your industry is manufacturing, warehousing or education, there is a need for a wireless break bell system.

Questions? Contact Us Today!
Our Customers Love Netbell

Linortek Netbell is an ease-of-use network break timed alert system which has been custom developed for schools, factories, warehouses and other organizations that are in need of building a web-based automatic break time bell system.
With the BellScheduler desk app, you can manage & schedule multiple Netbell devices whether in a single building, multiple buildings or multiple locations from one easy-to-use interface, without the need of hard-wiring the bells to a central control station, making the management of your bell systems incredibly easy. Although it is typically used for break time alarm, some customers have used the Netbell system for other applications such as Aquaculture Farm control & monitoring.

We moved into a new hangar building 1.5 years ago, we had no way to keep track of employees during break time. People were taking advantage of the manual operation – warehouse manager vocal notification, employees coming in late to work or back from break. Efficiency and production were less to due to distractions. We like the Netbell for the ability to log into the server and have remote access, the priced right for the bells / hardware and web setup and no future costs. It’s a great reliable system!”

“As a growing school, our existing solution was no longer capable of meeting our needs. I needed to find a solution that was quickly installed without making any significant infrastructure changes. Netbell is very easy to set up and operate, plugs right into our network and we can set different schedules for each school from a simple web interface, it provides both temporary and long-term solution for future expansion.”

“We are automotive parts manufacturer and have been looking for break bell system to our best fit. Before we started using Netbell, our break times were out of control and cutting into our production.  We needed a bell system that was inexpensive and easy to install with existing network, easy to setup, and easy to change schedules.  Netbell provided all that and more, plus their excellent customer support. Get to result what I am looking for.”

© 2012-2020 Linortek - Remote Control Monitoring Solutions for Industrial Internet of Things