FARGO R4ADI Web Relay Board for Remote Control Power Switch & Current Monitoring

With 4 relay outputs, 4 digital inputs that can display state, frequency, period or as a counter, 4 analog value inputs allowing current monitoring of external equipment.

Fargo R4ADI is a TCP/IP web enabled relay control & monitoring I/O board with a built in web server. It has 4 relay outputs, 4 optically isolated digital inputs that can display state, frequency, period or as a counter. Additional Fargo R4ADI has 4 analog value inputs, 2 of the analog inputs are specifically designed for interfacing to current sensors allowing current monitoring of external equipment. It’s POE enabled.

Supplied with up to 16 schedules which are constructed as IF … THEN statements. IF this THEN do that. In addition the IF term can have 2 elements; IF this LOGIC this … THEN that. This provides a simple to program and powerful way to take advantage of the data acquired by the Fargo SERVER, gives you the ability to have one Fargo control another. This capability built into all units allows you to use the input or relay on one device to control a relay on another device over a network, or to take a signal from your main location system, and trigger remote equipment in different locations.

Fargo R4ADI is an ideal web control and monitoring solution for applications such as security, access control, remote power switch, current monitoring, industrial equipment monitoring, building automation system, environmental monitoring, HVAC system and much more.

If you are looking for a housed Ethernet relay controller with up to 4 low voltage relay outputs , you can check Koda family.

If you only want to turn your devices on/off over the Internet with up to 8 relay outputs, you can check FARGO R8.

If you don’t need to use the analog inputs, but still want 4 digital inputs and 4 relay outputs, pick FARGO R4DI. Check our Technical Specification chart to select the right one to fit your needs!

FARGO G2 & KODA Product Technical Specifications
FARGO G2 & KODA Product Technical Specifications
Fargo-and-Koda-Specificatios-V0516.pdf
Version: 0516
303.9 KiB
801 Downloads
Details

FARGO G2R4ADI for Current Mornitoring

FARGO G2R4ADI for Current Mornitoring

FARGO G2R4ADI for Current Mornitoring

FARGO G2R4ADI for Current Mornitoring

FARGO G2R4ADI for Current Mornitoring Board

FARGO G2R4ADI for Current Mornitoring Board

The Key Features

  • No 3rd party server and no monthly fees
  • Free Android & iPhone Apps
  • Email alerts of various user selectable events
  • Ability to interface to current sensors to monitor the current being used by external equipment with the analog inputs
  • Digital Inputs measure state, frequency period, or as a counter
  • 16 event schedulers, over 10,000 item log
  • NTP automatic internet time setting
  • Automatic unit discovery
  • Completely configurable network settings including static or dynamic IP
  • Built in DYNDNS interface
  • Password protection
  • Web interface w/basic authentication
  • Ease-of-use web interface that provides quick access to setup and manage your devices
  • System voltage and temperature monitoring
  • Program and web page interface are upgradable over the internet
  • Designed, developed and made in USA
  • Custom, Semi-Custom, OEM services available

Specifications

  • 10M/100M RJ45 Internet interface with connection and activity LEDs
  • 4 relay outputs, 1 FORM C 48 Volt Max (12VDC/5A, 24VAC/DC 3A), 3 conductor screw terminal connector for each (normally open/common/normally closed)
  • 2 optically isolated, 2 pull down for contact close digital inputs, 2 conductor screw terminal connectors for each. Connect the 2 terminals to make input
  • 2 Analog 0-5 VDC Inputs 30mA 3.3VDC power source PTC protected. 3 conductor screw terminal connector for each (3.3VDC, input, ground)
  • 2 Current sensor inputs, 3.5mm stereo jack connector
  • Status LEDs (relay, pulse, bootloader, and locate)
  • Ethernet Bootloader (for server hardware code upgrade)
  • Power Input: POE or 12VDC @500mA (nominal) (power supply included)
  • 1 meter CAT5 cable supplied
  • Reset/Locate push-button
  • Working Temperature: from 0 to +70 Celsius
  • Storage Temperature: from -40 to +125 Celsius
  • Humidity: from 10% to 80% non-condensing
  • Dimensions: 74mm x 100mm x 20mm
  • Supported Protocols: HTTP/SMTP/SNTP