Connect a 12VDC Bell to Netbell-2
Find Output 1 on the Netbell-2 device, which has two terminals. Connect the negative wire from the bell to Output 1. Then connect the negative wire from the 12VDC power supply (marked with white stripes) to Output 1. Ensure the positive wire from the bell connects to the positive wire from the power supply (solid black). If using WAGO connectors, only insert bare copper wire into the slot, avoiding the insulated part.
Connect a 24VAC Extra Loud Bell to Netbell-2
Find Output 1 on the Netbell-2 device, which has two terminals. When wiring 24VAC device there is no positive or negative side. Connect one wire from the bell to Output 1. Connect 2 conductor wire to the 24VAC Power supply (AC and AC terminals). Then connect one wire from the 24VAC power supply to Output 1. Ensure the second wire from the bell connects to the second wire from the power supply. If using WAGO connectors, only insert bare copper wire into the slot, avoiding the insulated part.
Connect a 24VAC Buzzer to Netbell-2
Find Output 1 on the Netbell-2 device, which has two terminals. When wiring 24VAC device there is no positive or negative side. Connect one wire from the buzzer to Output 1. Connect 2 conductor wire to the 24VAC Power supply (AC and AC terminals). Then connect one wire from the 24VAC power supply to Output 1. Ensure the second wire from the buzzer connects to the second wire from the power supply. If using WAGO connectors, only insert bare copper wire into the slot, avoiding the insulated part.
