There are many cases where the use of a Linortek IoTMeter on mobile equipment are needed. Many of these machines may spend long periods of time away from a WiFi network. The end-user’s primary concern is that they will not be able to keep an up-to-date recording of run-time on their machines until it returns […]
The Linortek IoTmeter can be used to monitor runtime of any machinery such from lathes to laser cutters. You will need a constant 12-48VDC power source for the IoTMeter, and a 5-24VDC signal to one of the digital inputs that will switch on and off with the machine to trigger the hour meter. Please note […]
Sometimes your business may require you to connect to your IoT Meter or Netbell unit from outside your work network. This can be done by port forwarding your device to the internet. You will need administrator access to the router your Linortek device is connected to, and you will need Dynamic DNS (DDNS) service from […]
After installing the IoTMeter on your equipment and configuring the software, the Linortek IoTMeter will record the equipment’s run time hours. You can monitor the real time data either from the built-in webpage or the HourCollector desktop app. Many companies have their own management software and would like to integrate the equipment hour readings to […]
The Netbell-NTG can play custom audio files as well as control bells and buzzers, but you can also run background music through it and interrupt the music when you need to play a message. This is done by connecting a music source such as an mp3 player or a radio to the Normally Closed connections […]
